datasheet | october 2013 fiber optics | rev 2013.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications catv systems long distance rf/microwave fiber optic communication links sensing and control systems high performance supertrunking links high power distri bution networks redundanct ring architectures fttx networks features full function fiber optic amplifier ready for integration low noise figure (typ < 4.5 db) pin: -6 dbm to +12 dbm pout: +14 dbm to +23 dbm rs-232 monitor and control interface standard and optional gain flatness low electrical power consumption input/output isolation >40/40 db polarization dependant gain < 0.1 db polarization mode dispersion < 0.2 ps input & output return losses < -40 db output residual pump power < -30 dbm back reflection monitoring mafa 1000 series erbium doped fiber micro amplifier emcore?s mafa 1000 series erbium doped fiber micro amplifier ( edfa) gain block module is an ideal building bl ock for oem system integrators. the family of mafa 1000 edfa gain blocks is designed to meet the most demanding noise performance requirements of fiber optic communications and control systems, and performs all the functions r equired of an optical amplifier for system integration. mafa 1000 series edfa gain blocks provide input and output optical isolation for stable, low noise operation. the input an d output optical signal power levels are detected for monitoring and control. the input optical signal is amplified with active gain control for a constant output power level or with active output power control for constant gain mode operation. the mafa 1000 series edfa gain blocks also provide monitors and associated alarms for all critical operating parameter s. the optical output of the mafa 1000 series edfa gain blocks can be split in to multiple ports by optional external splitter. optional back reflection monitoring feature enables safe output optical power managing. the compact mechanical footprint of the mafa 1000 allows using this unit to be installed in small space environments. mafa 1000 series edfa
datasheet | october 2013 fiber optics | rev 2013.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. optical/electrical characteristics 1 property unit limit models comments (note 1) 1014 1017 1020 1022 1023 operating input power pin (dbm) max 12 12 12 12 12 operating input power pin (dbm) min -6 -6 -6 -6 -6 typical (may vary for some models) output power po(dbm) nominal 14 +/-.25 17 +/- .25 20 +/- .25 22 +/- .25 23 +/- .25 note 2 noise figure nf (db) typ ? 4.0 db ? 4.0 db ? 4.0 db ? 4.0 db ? 4.0 db @ pin = 0 dbm, no pin monitoring (notes 3, 7, 8) static gain flatness ? gs (db) max +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 (notes 4) dynamic gain flatness ? gd (db) max +/-1.0 +/-1.25 +/-1.5 +/-2.0 +/-2.0 (notes 5, 7) output power stability (db) max +/- 0.1 +/ - 0.1 +/- 0.1 +/- 0. 1 +/- 0.1 (note 6) power consumption (steady state) psys(w) max 2 3 5 6 8 70 o c case notes: 1. unless stated otherwise, all specif ications apply over the full operating temperature and humidity ranges 2. measurement variations 3. measured with 8 evenly spread input optical signals @ 25c, ? pin 0 dbm. measuring with 1 input optical signal with pin 0 dbm and ? 1550 nm is also possible. 4. measured with a swept probe signal (pp), where pp 0 dbm @ 25 ? c 5. applicable for option 01 only. measured with a swept probe signal (pp), and a fixed tone signal (pt) @ ~ 1550 nm; (pt pp+20 db; pt + pp 0 dbm) @ 25 ? c; gain flattened options with ? g +/-1.0db are available (for some models and for defined input optical power only) 6. over polarization and temperature 7. specific ? g can be guaranteed at a single specified input optical power level (pin = pt + pp) equal or different from 0 dbm 8. if input power monitoring and input isolation are required then typical nf (for all units @ pin = 0 dbm) < 4.5 db general and mechanical specifications property requirement comments operating wavelength 1532 nm ~ 1565 nm standard operating case temperature 0 ? c to 50 ? c standard* storage temperature -40 ? c to 85 ? c standard operating humidity 20% to 85% non-condensing voltage supply range +12 vdc/+5 vdc/+3.3 vdc all versions** optical connectors sc; fc; e2000 user specified dimensions (mm) 70 x 90 x 15 all versions * - extended temperature range of ?40oc to +75oc is also possible ** transient pulse to +x.x vdc + 5% for < 100 msec mafa 1000 series edfa
datasheet | october 2013 fiber optics | rev 2013.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. outline drawing (dimensions in mm) compliance and reliability information fcc: subpart b. part 15 clas s ?a?: unintentional radiators en 55013: sound and television broadcast receivers and associated equipment ? radio disturbance characteristics- limits and methods of measurements ? electric field radiation emissions (2001) fit rate: 90% level of confidence - 290 @ 25 ? c electrical connector pinout pin # designation pin # designation 1 +12 vdc/+5 vdc/+3.3 vdc 16 led_laser_on 2 +12 vdc/+5 vdc/+3.3 vdc 17 n/a 3 +12 vdc/+5 vdc/+3.3 vdc 18 pump_bias_alarm * 4 +12 vdc/+5 vdc/+3.3 vdc 19 loss_input_power * 5 gnd 20 loss_output_power * 6 gnd 21 n/a 7 rs232_rx 22 n/a 8 rs232_tx 23 back_reflection_alarm * 9 gnd 24 n/a 10 gnd 25 n/a 11 led_comm 26 n/a 12 edfa_reset 27 n/a 13 edfa_disable 28 n/a 14 pout_mute 29 n/a 15 edfa_temp_alarm * 30 n/a * - software adjustable parameters; logic levels (low / high) tbd mafa 1000 series edf a
datasheet | october 2013 fiber optics | rev 2013.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. ordering information mafa10 - - - - power level connector option gf/nf options temp options v oltage options 1014 ? 14 dbm sc1 - sc/apc 00 - standard s- standard 1 ? ?+12 vdc? 1017 ? 17 dbm s21 - sc/pc 01 ? gain flattened option 2 ? ?+5 vdc? 1020 ? 20 dbm fc1- fc/apc 02 ? no pin monitoring, low nf option e ? extended 3 ? ?+3.3 vdc? 1020 ? 22 dbm fc2- fc/pc 03 ? standard with back reflection monitoring 1023 ? 23 dbm ec1-e2000/apc ec2-e2000/pc example: mafa1014-sc-00-s-2: 14 dbm gain block with sc/apc optical connectors, standard ng/gf, standard temperature range, +5 vdc power supply note: only some models can be order with gain flattened options. (-01 suffixes). please contact your sales representative for details laser safety information this component product does not meet the applicable requirements of 21 cfr 1010 & 1040 and is classified as a class iiib laser product based on the maximum optical output power defined be low. during use as intended, the laser energy is fully contained within the fiber network such that there is no ac cessible laser radiation and would meet the requirements for a class i laser product. wavelength = 1532 ~ 1565 nm (dependent on input source) maximum output power = 200 mw mafa 1000 series edfa
|
